|
|
|
Title | Hitachi RAU323HWDD 2 Ton 3 Star Split AC |
Brand | Hitachi |
Model No | RAU323HWDD |
AC Type | Wall |
Capacity in tons | 2 Ton |
Star Rating | 3 |
Inverter Technology | No |
Indoor Noise Level | Low: 37 dB |
Operating Current | 9.5 Ampere |
Cooling Capacity | 7020 Watts |
Power Input | 2134 Watt |
EER | 3.29 W/W |
Power Requirements | 230 V Single Phase,50 Hz |
Cool Mode | No |
Dehumidification | No |
Dry Mode | No |
Sleep Mode | |
Turbo Mode | No |
Remote | |
Night Glow Functions On Remote Buttons | No |
Active Carbon Filter | No |
Anti Bacteria Filter | No |
Catechin | No |
Dual Protection Filter | No |
Triple Filter | No |
Virus and Allergy Safe Filter | No |
Auto Restart | |
Auto Clean | No |
Front Panel Display | No |
Fuzzy Logic | No |
Hot & Cold | No |
Jet Cool | No |
Self Diagnosis | No |
Timer | On-Timer: Off-Timer: |
Color | Grey, White |
Compressor | Rotary |
Other Body Design Features | Auto Climate Technology (ACT), Auto Humid Control |
Air Flow Direction | 4-Way Air Swing |
Auto Air Swing | Present |
Speed Setting | No |
Other features | Air Circulation (High)(M3/Hr):636 (CFM) |
Installation Details | Installation of Air-conditioner is charged extra to customer at the time of installation and needs to be paid directly to the service engineer. Standard Installation of Split AC Covers only Split AC:- 1.Drilling of hole in Brick wall for taking out the pipes 2.Fixing hole sleeve & Cap 3.Fixing the Indoor and Outdoor Unit. 4.Connecting Indoor and Outdoor units using Standard Kit provided by Manufacturer (at an additional cost, unless specified otherwise). Wrapping the pipe with seasoning tape. 5.Connection to Stabilizer or Power point in the range of Power Cord Provided by Manufacture. 6.Temperature/Performance Check & Demo and Maintenance tips filling the details in warranty card. Not covered in installation:- 1.Out Door Unit Stand. 2.Extra copper wire if any. 3.Drain Pipe extension if any. 4.Plumbing and Masonry Work. 5.Wiring extension from Meter to site, Power point/MCB fitting and any other electrical work,Carpentry work. 6.Dismantling/Shifting of Old AC`s Masonry, Core Cutting Fabrication and Electrical |
Services Included In Basic Installation | Standard Installation of Split AC Covers only Split AC:- 1.Drilling of hole in Brick wall for taking out the pipes 2.Fixing hole sleeve & Cap 3.Fixing the Indoor and Outdoor Unit. 4.Connecting Indoor and Outdoor units using Standard Kit provided by Manufacturer (at an additional cost, unless specified otherwise). Wrapping the pipe with seasoning tape. 5.Connection to Stabilizer or Power point in the range of Power Cord Provided by Manufacture. 6.Temperature/Performance Check & Demo and Maintenance tips filling the details in warranty card. Not covered in installation:- 1.Out Door Unit Stand. 2.Extra copper wire if any. 3.Drain Pipe extension if any. 4.Plumbing and Masonry Work. 5.Wiring extension from Meter to site, Power point/MCB fitting and any other electrical work,Carpentry work. 6.Dismantling/Shifting of Old AC`s Masonry, Core Cutting Fabrication and Electrical |
Installation Warranty | 1 year |
Differences
• Type:
Window vs Split
Common Features
Consumers less power:
1630 Watts vs 2134 Watts
Lower Tonnage:
1.5 Tons vs 2 Tons
Common Features
Consumers less power:
1860 Watts vs 2134 Watts
Common Features
Consumers less power:
2000 Watts vs 2134 Watts
Common Features
Consumers less power:
2060 Watts vs 2134 Watts
Common Features
Consumes more power:
2350 Watts vs 2134 Watts
Common Features