OnePlus 10 Pro early renders, specifications leak out ahead of official release

OnePlus 10 Pro design has been shown off through renders of an early prototype model. Check out the renders here.

Published On: November 10, 2021 | Last Updated: November 10, 2021

Highlights

OnePlus 10 series will launch sometime during Q1 2022.
Way ahead of launch, the renders and key specifications of the OnePlus 10 Pro have surfaced.
The OnePlus 10 Pro will allegedly sport a triple rear camera setup.

OnePlus will reportedly unveil its OnePlus 10 lineup of smartphones in Q1 2022. The launch is supposed to happen sometime during the end of the first quarter, meaning that there’s still plenty of time left to see the devices officially. That, however, has not stopped the leaks from popping up, as we now have our very first look at the OnePlus 10 Pro. The renders showcase the phone’s unique rear panel in all its glory. Take a look at the leaked OnePlus 10 Pro renders and expected specifications to see what the flagship has in store for us.

Show Full Article

OnePlus 10 Pro first look is out

This is what the OnePlus 10 Pro will allegedly look like from the back, according to renders provided by tipster OnLeaks in collaboration with Zouton. The device is said to sport a triple rear camera setup. The square-shaped camera module will make room for three cameras and the LED flash. The module will be wrapped around the right side of the device, similar to what we have seen on the Samsung Galaxy S21.

On the right side of the device, we can see the vintage alert slider and the power button. The volume up and down buttons, therefore, will likely be placed on the left side of the device. Other than the camera module, we can see the OnePlus logo on the rear of the device. The rear of the OnePlus 10 Pro appears to feature a matte finish and the device will likely flaunt a metal chassis.

Steve Hemmerstoffer aka OnLeaks said that the renders are based on real-life pictures of an early prototype, so it’s possible some details might change in the final device.

OnePlus 10 Pro specifications (expected)

Coming to the specifications of the device, the OnePlus 10 Pro is tipped to sport a 6.7-inch 1,440 x 3,215 pixel Fluid AMOLED display with a 526 PPI pixel density. Though not confirmed, we can expect the selfie camera to be embedded underneath a centrally-aligned punch-hole. Moving on, the device is said to sport a 5,000mAh battery with support for fast charging. The OnePlus 10 Pro will measure 163.2mm x 73.6mm x 8.7mm, as per the report. Under the hood, the device will most likely be powered by an octa-core Qualcomm Snapdragon 898 processor. Lastly, the source claims that the device will come in 128GB and 256GB storage variants.

Also Read: Another OnePlus Nord 2 reportedly blasts, user receives severe burns [Update]

So far, this is all the information that we have on the upcoming OnePlus 10 Pro, but we are sure to receive more such leaks in the near future as the launch approaches. Whenever we do, we will make sure to keep you posted on the same.