POCO M3 specifications may include the Snapdragon 662 SoC, 6,000mAh battery, and 48MP triple cameras.
POCO M3 launch is set for November 24th in Europe and the company has not yet revealed anything about the smartphone apart from its name. Recently, the POCO M3 specifications were leaked which revealed that the phone will come with a 6.53-inch FHD+ Dot Drop display, Qualcomm Snapdragon 662 SoC, and triple rear cameras, among other things. We can now see what the device will look like courtesy a render provided to us by tipster Ishan Agarwal. The POCO M3 design is shown off completely in the image (seen above), revealing a waterdrop display, triple rear camera system, and a unique dual-tone finish on the back.
As you can see from the render above, the POCO M3 features a waterdrop notch to house the selfie camera and a noticeable chin. We see a side-mounted fingerprint sensor just below the volume buttons on the right side of the frame and a SIM tray on the left. Our attention, however, is on the back of the POCO M3 as we see a unique dual-tone finish. There's a large black rectangular block on the top half of the panel within which we see the POCO logo and another rectangular module that houses the triple cameras and LED flash. The render also reveals the phone will come in black, yellow, and blue colour options.
From what we know so far, the POCO M3 will sport a 6.53-inch FHD+ Dot Drop display and will be powered by the Qualcomm Snapdragon 662 chipset paired with 4GB RAM. The device will pack a large 6,000mAh battery and support 18W fast charging. As for the cameras, the POCO M3 is tipped to offer a 48MP primary sensor. Details about the remaining camera sensors and storage options are still under wraps. The POCO M3 is speculated to be the global version of the upcoming Redmi Note 10 4G - the latter appeared on TENAA with similar specifications.