Details regarding the other key Realme Watch T1 specifications and hardware, however, are still unknown.
Realme Q3s, Realme GT Neo2T launching too: leaked specifications
As for the other two products launching at tomorrow’s event, the Realme Watch T1 will be launched alongside the Q3s and GT Neo2T smartphones. The former is confirmed to get an adaptive refresh rate 144Hz 6.6-inch LCD display. The TENAA certification reveals that the Realme Q3s will have the model number RMX3461/62 and could be powered by the Snapdragon 778G SoC from the house of Qualcomm. The processor will be coupled with up to 12GB of LPDDR4X RAM and 512GB of UFS 2.1 storage. It is likely to feature a 48MP main camera along with 2MP macro and depth sensors, 5000mAh battery, side-mounted fingerprint sensor and Realme 2.0 skin based on Android 11.
Realme Q3 specifications
- 6.6-inch 144Hz LCD panel
- Up to 12GB LPDDR4X RAM
- Up to 512GB UFS 2.1 storage
- 48MP primary camera
- 5,000mAh battery
- Android 11-based Realme 2.0 UI
The other smartphone to be made public in this launch event is the Realme GT Neo2T. The Realme GT Neo2T has been going through a stream of leaks and rumours ahead of the October 19th launch. The Realme GT Neo2T will come with a 6.43-inch FHD+ AMOLED panel with a 120Hz refresh rate. The device will run on the Dimensity 1200 processor and will benefit from up to 12GB of physical RAM as well as virtual RAM. The onboard 4,500mAh battery is capable of charging at 65W and the optics department will be handled by a 64MP main camera, 8MP ultra-wide lens and a 2MP tertiary sensor.