|
|
|
Title | Hyundai Kenstar KSM35.WN1 1 Ton 5 Star Split AC |
Brand | Hyundai |
Model No | Kenstar KSM35.WN1 |
AC Type | Wall |
Capacity in tons | 1 Ton |
Star Rating | 5 |
Inverter Technology | No |
Indoor Noise Level | Low: 33 dB, High: 40 dB |
Operating Current | 4.48 Ampere |
Cooling Capacity | 3490 Watts |
Power Input | 995 Watt |
EER | 3.51 W/W |
Power Requirements | AC 230 V, 50 Hz,Single |
Heating Capacity | 3490 Watts |
Cool Mode | |
Dehumidification | |
Dry Mode | |
Sleep Mode | |
Turbo Mode | |
Other Modes | Auto Mode |
Remote Control | LCD Remote |
Night Glow Functions On Remote Buttons |
Active Carbon Filter | No |
Anti Bacteria Filter | |
Catechin | No |
Dual Protection Filter | No |
Triple Filter | No |
Virus and Allergy Safe Filter | No |
Auto Restart | |
Auto Clean | No |
Front Panel Display | |
Fuzzy Logic | No |
Hot & Cold | No |
Jet Cool | No |
Self Diagnosis | No |
Timer | On-Timer: Off-Timer: |
Other Convenience Features | Temp. Control:Thermistor |
Color | White |
Control Console | Remote Control |
Refrigerant | R 22 |
Auto Air Swing | Present |
Speed Setting | |
Stepped Louvers | |
Other features | Air circulation:600, Auto Air Swing:(Vertical only) |
Installation Details | Installation of Air-conditioner is charged extra to customer at the time of installation and needs to be paid directly to the service engineer. Standard Installation of Split AC Covers only Split AC:- 1.Drilling of hole in Brick wall for taking out the pipes 2.Fixing hole sleeve & Cap 3.Fixing the Indoor and Outdoor Unit. 4.Connecting Indoor and Outdoor units using Standard Kit provided by Manufacturer (at an additional cost, unless specified otherwise). Wrapping the pipe with seasoning tape. 5.Connection to Stabilizer or Power point in the range of Power Cord Provided by Manufacture. 6.Temperature/Performance Check & Demo and Maintenance tips filling the details in warranty card. Not covered in installation:- 1.Out Door Unit Stand. 2.Extra copper wire if any. 3.Drain Pipe extension if any. 4.Plumbing and Masonry Work. 5.Wiring extension from Meter to site, Power point/MCB fitting and any other electrical work,Carpentry work. 6.Dismantling/Shifting of Old AC`s Masonry, Core Cutting Fabrication and Electrical |
Services Included In Basic Installation | Standard Installation of Split AC Covers only Split AC:- 1.Drilling of hole in Brick wall for taking out the pipes 2.Fixing hole sleeve & Cap 3.Fixing the Indoor and Outdoor Unit. 4.Connecting Indoor and Outdoor units using Standard Kit provided by Manufacturer (at an additional cost, unless specified otherwise). Wrapping the pipe with seasoning tape. 5.Connection to Stabilizer or Power point in the range of Power Cord Provided by Manufacture. 6.Temperature/Performance Check & Demo and Maintenance tips filling the details in warranty card. Not covered in installation:- 1.Out Door Unit Stand. 2.Extra copper wire if any. 3.Drain Pipe extension if any. 4.Plumbing and Masonry Work. 5.Wiring extension from Meter to site, Power point/MCB fitting and any other electrical work,Carpentry work. 6.Dismantling/Shifting of Old AC`s Masonry, Core Cutting Fabrication and Electrical |
Installation Warranty | 1 Year Comprehensive and 4 Years on Compressor |
Consumes more power:
999 Watts vs 995 Watts
Common Features
Consumers less power:
940 Watts vs 995 Watts
Common Features
Consumes more power:
1013 Watts vs 995 Watts
Common Features
Consumes more power:
1010 Watts vs 995 Watts
Common Features
Higher Tonnage:
1.2 Tons vs 1 Tons
Consumes more power:
1140 Watts vs 995 Watts
Common Features
Consumers less power:
943 Watts vs 995 Watts
Common Features