|
|
|
Title | Midea Flair 1 Ton Split AC |
Brand | Midea |
Model No | Flair |
AC Type | Wall |
Capacity in tons | 1 Ton |
Star Rating | 3 |
Inverter Technology | No |
Indoor Noise Level | Low: 32 dB, Medium: 36 dB, High: 38 dB |
Power Requirements | AC 230 V, 50 Hz,Single |
Cool Mode | No |
Dehumidification | |
Dry Mode | No |
Sleep Mode | |
Turbo Mode | No |
Night Glow Functions On Remote Buttons | No |
Active Carbon Filter | No |
Anti Bacteria Filter | |
Catechin | No |
Dual Protection Filter | No |
Triple Filter | No |
Virus and Allergy Safe Filter | No |
Auto Restart | |
Auto Clean | |
Front Panel Display | |
Fuzzy Logic | No |
Hot & Cold | No |
Jet Cool | No |
Self Diagnosis | No |
Timer | On-Timer: Off-Timer: |
Color | White |
Main Unit Condenser Coil | Copper |
Air Circulation In | 341 CFM |
Auto Air Swing | Present, Auto Air-Swing (Up-Down), Auto Air-Swing (Left-Right) |
Speed Setting | No |
Installation Details | Installation of Air-conditioner is charged extra to customer at the time of installation and needs to be paid directly to the service engineer. Standard Installation of Split AC Covers only Split AC:- 1.Drilling of hole in Brick wall for taking out the pipes 2.Fixing hole sleeve & Cap 3.Fixing the Indoor and Outdoor Unit. 4.Connecting Indoor and Outdoor units using Standard Kit provided by Manufacturer (at an additional cost, unless specified otherwise). Wrapping the pipe with seasoning tape. 5.Connection to Stabilizer or Power point in the range of Power Cord Provided by Manufacture. 6.Temperature/Performance Check & Demo and Maintenance tips filling the details in warranty card. Not covered in installation:- 1.Out Door Unit Stand. 2.Extra copper wire if any. 3.Drain Pipe extension if any. 4.Plumbing and Masonry Work. 5.Wiring extension from Meter to site, Power point/MCB fitting and any other electrical work,Carpentry work. 6.Dismantling/Shifting of Old AC`s Masonry, Core Cutting Fabrication and Electrical |
Services Included In Basic Installation | Standard Installation of Split AC Covers only Split AC:- 1.Drilling of hole in Brick wall for taking out the pipes 2.Fixing hole sleeve & Cap 3.Fixing the Indoor and Outdoor Unit. 4.Connecting Indoor and Outdoor units using Standard Kit provided by Manufacturer (at an additional cost, unless specified otherwise). Wrapping the pipe with seasoning tape. 5.Connection to Stabilizer or Power point in the range of Power Cord Provided by Manufacture. 6.Temperature/Performance Check & Demo and Maintenance tips filling the details in warranty card. Not covered in installation:- 1.Out Door Unit Stand. 2.Extra copper wire if any. 3.Drain Pipe extension if any. 4.Plumbing and Masonry Work. 5.Wiring extension from Meter to site, Power point/MCB fitting and any other electrical work,Carpentry work. 6.Dismantling/Shifting of Old AC`s Masonry, Core Cutting Fabrication and Electrical |
Has Power input
1030 Watts
Common Features
Has Power input
1070 Watts
Common Features
Has Power input
1060 Watts
Common Features
Has Power input
983 Watts
Common Features
Has Power input
1060 Watts
Common Features
Has Power input
1053 Watts
Common Features