|
|
|
Title | Trane TSI18MS 1.5 Ton Inverter Split AC |
Brand | Trane |
Model No | TSI18MS |
AC Type | Wall |
Capacity in tons | 1.5 Ton |
Inverter Technology | Yes |
Power Input | 5217 Watt |
Power Requirements | AC 230V |
Cool Mode | Yes |
Dehumidification | No |
Dry Mode | No |
Sleep Mode | Yes |
Turbo Mode | Yes |
Night Glow Functions On Remote Buttons | No |
Active Carbon Filter | No |
Anti Bacteria Filter | Yes |
Catechin | No |
Dual Protection Filter | No |
Triple Filter | No |
Virus and Allergy Safe Filter | No |
Auto Restart | Yes |
Auto Clean | Yes |
Energy Save | yes |
Front Panel Display | Yes |
Fuzzy Logic | No |
Hot & Cold | No |
Jet Cool | No |
Self Diagnosis | No |
Timer | Yes, On-Timer: Yes, Off-Timer: Yes |
Color | White |
Compressor | Rotary |
Control Console | Remote |
Evaporator Fin Type | Hydrophilic |
Main Unit Condenser Coil | Copper |
Refrigerant | R 22 |
Other Body Design Features | Copper evaporator tubes |
Auto Air Swing | Present |
Speed Setting | No |
Installation Details | Installation of Air-conditioner is charged extra to customer at the time of installation and needs to be paid directly to the service engineer. Standard Installation of Split AC Covers only Split AC:- 1.Drilling of hole in Brick wall for taking out the pipes 2.Fixing hole sleeve & Cap 3.Fixing the Indoor and Outdoor Unit. 4.Connecting Indoor and Outdoor units using Standard Kit provided by Manufacturer (at an additional cost, unless specified otherwise). Wrapping the pipe with seasoning tape. 5.Connection to Stabilizer or Power point in the range of Power Cord Provided by Manufacture. 6.Temperature/Performance Check & Demo and Maintenance tips filling the details in warranty card. Not covered in installation:- 1.Out Door Unit Stand. 2.Extra copper wire if any. 3.Drain Pipe extension if any. 4.Plumbing and Masonry Work. 5.Wiring extension from Meter to site, Power point/MCB fitting and any other electrical work,Carpentry work. 6.Dismantling/Shifting of Old AC`s Masonry, Core Cutting Fabrication and Electrical |
Services Included In Basic Installation | Standard Installation of Split AC Covers only Split AC:- 1.Drilling of hole in Brick wall for taking out the pipes 2.Fixing hole sleeve & Cap 3.Fixing the Indoor and Outdoor Unit. 4.Connecting Indoor and Outdoor units using Standard Kit provided by Manufacturer (at an additional cost, unless specified otherwise). Wrapping the pipe with seasoning tape. 5.Connection to Stabilizer or Power point in the range of Power Cord Provided by Manufacture. 6.Temperature/Performance Check & Demo and Maintenance tips filling the details in warranty card. Not covered in installation:- 1.Out Door Unit Stand. 2.Extra copper wire if any. 3.Drain Pipe extension if any. 4.Plumbing and Masonry Work. 5.Wiring extension from Meter to site, Power point/MCB fitting and any other electrical work,Carpentry work. 6.Dismantling/Shifting of Old AC`s Masonry, Core Cutting Fabrication and Electrical |
Installation Warranty | 1 Year Comprehensive, 5 Years on Compressor |
Consumers less power:
2020 Watts vs 5217 Watts
Common Features
Consumers less power:
1310 Watts vs 5217 Watts
Common Features
Higher Tonnage:
1.8 Tons vs 1.5 Tons
Common Features
Common Features
Common Features
Common Features