|
|
|
Title | Voltas 18H Elegant S Hot and Cold 1.5 Ton Inverter Split AC |
Brand | Voltas |
Model No | 18H Elegant S Hot and Cold |
AC Type | Split |
Capacity in tons | 1.5 Ton |
Inverter Technology | Yes |
Indoor Noise Level | Low: 37 dB, High: 44 dB |
Power Requirements | AC 220-240C,50HZ,Single Phase |
Cool Mode | Yes |
Dehumidification | Yes |
Dry Mode | No |
Sleep Mode | Yes |
Turbo Mode | No |
Active Carbon Filter | No |
Anti Bacteria Filter | Yes |
Catechin | No |
Dual Protection Filter | No |
Triple Filter | No |
Virus and Allergy Safe Filter | No |
Other Filters | Dust filter |
Auto Restart | Yes |
Auto Clean | No |
Front Panel Display | Yes |
Fuzzy Logic | No |
Hot & Cold | Yes |
Jet Cool | No |
Self Diagnosis | No |
Timer | Yes, On-Timer: Yes, Off-Timer: Yes |
Color | White |
Compressor | Rotatry |
Control Console | Remote |
Main Unit Condenser Coil | Copper |
Outdoor Unit Condenser Coil | Copper |
Air Circulation In | 850 CMH |
Auto Air Swing | Present, Auto Air-Swing (Up-Down) |
Speed Setting | No |
Installation Details | Installation of Air-conditioner is charged extra to customer at the time of installation and needs to be paid directly to the service engineer. Standard Installation of Split AC Covers only Split AC:- 1.Drilling of hole in Brick wall for taking out the pipes 2.Fixing hole sleeve & Cap 3.Fixing the Indoor and Outdoor Unit. 4.Connecting Indoor and Outdoor units using Standard Kit provided by Manufacturer (at an additional cost, unless specified otherwise). Wrapping the pipe with seasoning tape. 5.Connection to Stabilizer or Power point in the range of Power Cord Provided by Manufacture. 6.Temperature/Performance Check & Demo and Maintenance tips filling the details in warranty card. Not covered in installation:- 1.Out Door Unit Stand. 2.Extra copper wire if any. 3.Drain Pipe extension if any. 4.Plumbing and Masonry Work. 5.Wiring extension from Meter to site, Power point/MCB fitting and any other electrical work,Carpentry work. 6.Dismantling/Shifting of Old AC`s Masonry, Core Cutting Fabrication and Electrical |
Services Included In Basic Installation | Standard Installation of Split AC Covers only Split AC:- 1.Drilling of hole in Brick wall for taking out the pipes 2.Fixing hole sleeve & Cap 3.Fixing the Indoor and Outdoor Unit. 4.Connecting Indoor and Outdoor units using Standard Kit provided by Manufacturer (at an additional cost, unless specified otherwise). Wrapping the pipe with seasoning tape. 5.Connection to Stabilizer or Power point in the range of Power Cord Provided by Manufacture. 6.Temperature/Performance Check & Demo and Maintenance tips filling the details in warranty card. Not covered in installation:- 1.Out Door Unit Stand. 2.Extra copper wire if any. 3.Drain Pipe extension if any. 4.Plumbing and Masonry Work. 5.Wiring extension from Meter to site, Power point/MCB fitting and any other electrical work,Carpentry work. 6.Dismantling/Shifting of Old AC`s Masonry, Core Cutting Fabrication and Electrical |
Installation Warranty | Compressor Warranty Period:5 Years Manufacturer Warranty,Body Warranty Period:1 Year Manufacturer Warranty |
Has Power input
1510 Watts
Differences
• Star Rating:
3 Star vs Inverter Star
Common Features
Has Power input
1492 Watts
Differences
• Star Rating:
3 Star vs Inverter Star
Common Features
Common Features
Has Power input
1740 Watts
Common Features
Has Power input
1440 Watts
Common Features
Has Power input
1440 Watts
Common Features