Title |
Onida Power Flat S243FLT- LA 2 Ton Split AC
|
---|---|
Brand |
Onida
|
Model No |
Power Flat S243FLT- LA
|
AC Type |
Split
|
Capacity in tons |
2 Ton
|
Inverter Technology |
No
|
Cooling Capacity |
7030 Watts
|
---|---|
Power Input |
1980 Watt
|
EER |
3.28 W/W
|
Power Requirements |
AC 230V
|
Cool Mode |
No
|
---|---|
Dry Mode |
No
|
Sleep Mode |
|
Other Modes |
Auto Mode
|
Night Glow Functions On Remote Buttons |
No
|
---|
Auto Restart |
No
|
---|---|
Auto Clean |
No
|
Front Panel Display |
No
|
Fuzzy Logic |
No
|
Jet Cool |
No
|
Self Diagnosis |
No
|
Timer |
No, On-Timer: No, Off-Timer: No
|
Other Convenience Features |
Instant cooling and high energy efficiency, 100 percent copper coil
|
Color |
White
|
---|---|
Control Console |
Remote
|
Main Unit Condenser Coil |
Copper
|
Auto Air Swing |
Present
|
---|---|
Speed Setting |
No
|
Other features |
Air flow:650 CFM
|
Installation Details |
Installation of Air-conditioner is charged extra to customer at the time of installation and needs to be paid directly to the service engineer. Standard Installation of Split AC Covers only Split AC:- 1.Drilling of hole in Brick wall for taking out the pipes 2.Fixing hole sleeve & Cap 3.Fixing the Indoor and Outdoor Unit. 4.Connecting Indoor and Outdoor units using Standard Kit provided by Manufacturer (at an additional cost, unless specified otherwise). Wrapping the pipe with seasoning tape. 5.Connection to Stabilizer or Power point in the range of Power Cord Provided by Manufacture. 6.Temperature/Performance Check & Demo and Maintenance tips filling the details in warranty card. Not covered in installation:- 1.Out Door Unit Stand. 2.Extra copper wire if any. 3.Drain Pipe extension if any. 4.Plumbing and Masonry Work. 5.Wiring extension from Meter to site, Power point/MCB fitting and any other electrical work,Carpentry work. 6.Dismantling/Shifting of Old AC`s Masonry, Core Cutting Fabrication and Electrical
Read More
|
---|---|
Services Included In Basic Installation |
Standard Installation of Split AC Covers only Split AC:- 1.Drilling of hole in Brick wall for taking out the pipes 2.Fixing hole sleeve & Cap 3.Fixing the Indoor and Outdoor Unit. 4.Connecting Indoor and Outdoor units using Standard Kit provided by Manufacturer (at an additional cost, unless specified otherwise). Wrapping the pipe with seasoning tape. 5.Connection to Stabilizer or Power point in the range of Power Cord Provided by Manufacture. 6.Temperature/Performance Check & Demo and Maintenance tips filling the details in warranty card. Not covered in installation:- 1.Out Door Unit Stand. 2.Extra copper wire if any. 3.Drain Pipe extension if any. 4.Plumbing and Masonry Work. 5.Wiring extension from Meter to site, Power point/MCB fitting and any other electrical work,Carpentry work. 6.Dismantling/Shifting of Old AC`s Masonry, Core Cutting Fabrication and Electrical
Read More
|
Installation Warranty |
1 year on comprehensive; 5 years on compressor
|