Largest Gadget Discovery Site in India
Login/Signup
|
|
|
| Title | SHARP AH-XP13PMT 1.1 Ton Inverter Split AC |
| Brand | Sharp |
| Model No | AH-XP13PMT |
| AC Type | Wall |
| Capacity in tons | 1.1 Ton |
| Inverter Technology |
|
| Indoor Noise Level | Low: 28 dB, High: 39 dB |
| Operating Current | 5.10 Ampere |
| Cooling Capacity | 2800 Watts |
| Power Input | 1010 Watt |
| EER | 4.02 W/W |
| Power Requirements | AC 220 - 240 V, 50 Hz,Single |
| Cool Mode |
 No
|
| Dehumidification |
|
| Dry Mode |
|
| Sleep Mode |
|
| Turbo Mode |
|
| Remote Control | LCD Wireless Remote Controller |
| Night Glow Functions On Remote Buttons |
No
|
| Active Carbon Filter |
No
|
| Anti Bacteria Filter |
|
| Catechin |
No
|
| Dual Protection Filter |
No
|
| Triple Filter |
No
|
| Virus and Allergy Safe Filter |
|
| Auto Restart |
|
| Auto Clean |
|
| Front Panel Display |
|
| Fuzzy Logic |
No
|
| Hot & Cold |
No
|
| Jet Cool |
No
|
| Self Diagnosis |
No
|
| Timer |
On-Timer: Off-Timer:
|
| Other Convenience Features | Air Circulation (High) (M3/Hr):660 (CMH) |
| Color | White |
| Compressor | Rotary |
| Control Console | Remote Control |
| Refrigerant | R 410A |
| Auto Air Swing | Present |
| Fan Speed Steps | 3 |
| Speed Setting |
|
| Installation Details | Installation of Air-conditioner is charged extra to customer at the time of installation and needs to be paid directly to the service engineer. Standard Installation of Split AC Covers only Split AC:- 1.Drilling of hole in Brick wall for taking out the pipes 2.Fixing hole sleeve & Cap 3.Fixing the Indoor and Outdoor Unit. 4.Connecting Indoor and Outdoor units using Standard Kit provided by Manufacturer (at an additional cost, unless specified otherwise). Wrapping the pipe with seasoning tape. 5.Connection to Stabilizer or Power point in the range of Power Cord Provided by Manufacture. 6.Temperature/Performance Check & Demo and Maintenance tips filling the details in warranty card. Not covered in installation:- 1.Out Door Unit Stand. 2.Extra copper wire if any. 3.Drain Pipe extension if any. 4.Plumbing and Masonry Work. 5.Wiring extension from Meter to site, Power point/MCB fitting and any other electrical work,Carpentry work. 6.Dismantling/Shifting of Old AC`s Masonry, Core Cutting Fabrication and Electrical |
| Services Included In Basic Installation | Standard Installation of Split AC Covers only Split AC:- 1.Drilling of hole in Brick wall for taking out the pipes 2.Fixing hole sleeve & Cap 3.Fixing the Indoor and Outdoor Unit. 4.Connecting Indoor and Outdoor units using Standard Kit provided by Manufacturer (at an additional cost, unless specified otherwise). Wrapping the pipe with seasoning tape. 5.Connection to Stabilizer or Power point in the range of Power Cord Provided by Manufacture. 6.Temperature/Performance Check & Demo and Maintenance tips filling the details in warranty card. Not covered in installation:- 1.Out Door Unit Stand. 2.Extra copper wire if any. 3.Drain Pipe extension if any. 4.Plumbing and Masonry Work. 5.Wiring extension from Meter to site, Power point/MCB fitting and any other electrical work,Carpentry work. 6.Dismantling/Shifting of Old AC`s Masonry, Core Cutting Fabrication and Electrical |
Lower Tonnage:
1 Tons vs 1.1 Tons
Consumes more power:
1090 Watts vs 1010 Watts
Common Features
Consumers less power:
1000 Watts vs 1010 Watts
Lower Tonnage:
1 Tons vs 1.1 Tons
Common Features
Consumers less power:
990 Watts vs 1010 Watts
Lower Tonnage:
1 Tons vs 1.1 Tons
Common Features
Consumers less power:
980 Watts vs 1010 Watts
Lower Tonnage:
1 Tons vs 1.1 Tons
Differences
• Star Rating:
3 Star vs Inverter Star
Common Features
Consumers less power:
968 Watts vs 1010 Watts
Lower Tonnage:
1 Tons vs 1.1 Tons
Common Features
Lower Tonnage:
1 Tons vs 1.1 Tons
Consumes more power:
1070 Watts vs 1010 Watts
Differences
• Star Rating:
3 Star vs Inverter Star
Common Features
