Largest Gadget Discovery Site in India
Login/Signup
|
|
| Title | Onida Power Flat S243FLT- LA 2 Ton Split AC |
| Brand | Onida |
| Model No | Power Flat S243FLT- LA |
| AC Type | Split |
| Capacity in tons | 2 Ton |
| Inverter Technology |
 No
|
| Cooling Capacity | 7030 Watts |
| Power Input | 1980 Watt |
| EER | 3.28 W/W |
| Power Requirements | AC 230V |
| Cool Mode |
No
|
| Dry Mode |
No
|
| Sleep Mode |
|
| Other Modes | Auto Mode |
| Night Glow Functions On Remote Buttons |
No
|
| Auto Restart |
No
|
| Auto Clean |
No
|
| Front Panel Display |
No
|
| Fuzzy Logic |
No
|
| Jet Cool |
No
|
| Self Diagnosis |
No
|
| Timer |
No, On-Timer: No, Off-Timer: No
|
| Other Convenience Features | Instant cooling and high energy efficiency, 100 percent copper coil |
| Color | White |
| Control Console | Remote |
| Main Unit Condenser Coil | Copper |
| Auto Air Swing | Present |
| Speed Setting |
No
|
| Other features | Air flow:650 CFM |
| Installation Details | Installation of Air-conditioner is charged extra to customer at the time of installation and needs to be paid directly to the service engineer. Standard Installation of Split AC Covers only Split AC:- 1.Drilling of hole in Brick wall for taking out the pipes 2.Fixing hole sleeve & Cap 3.Fixing the Indoor and Outdoor Unit. 4.Connecting Indoor and Outdoor units using Standard Kit provided by Manufacturer (at an additional cost, unless specified otherwise). Wrapping the pipe with seasoning tape. 5.Connection to Stabilizer or Power point in the range of Power Cord Provided by Manufacture. 6.Temperature/Performance Check & Demo and Maintenance tips filling the details in warranty card. Not covered in installation:- 1.Out Door Unit Stand. 2.Extra copper wire if any. 3.Drain Pipe extension if any. 4.Plumbing and Masonry Work. 5.Wiring extension from Meter to site, Power point/MCB fitting and any other electrical work,Carpentry work. 6.Dismantling/Shifting of Old AC`s Masonry, Core Cutting Fabrication and Electrical |
| Services Included In Basic Installation | Standard Installation of Split AC Covers only Split AC:- 1.Drilling of hole in Brick wall for taking out the pipes 2.Fixing hole sleeve & Cap 3.Fixing the Indoor and Outdoor Unit. 4.Connecting Indoor and Outdoor units using Standard Kit provided by Manufacturer (at an additional cost, unless specified otherwise). Wrapping the pipe with seasoning tape. 5.Connection to Stabilizer or Power point in the range of Power Cord Provided by Manufacture. 6.Temperature/Performance Check & Demo and Maintenance tips filling the details in warranty card. Not covered in installation:- 1.Out Door Unit Stand. 2.Extra copper wire if any. 3.Drain Pipe extension if any. 4.Plumbing and Masonry Work. 5.Wiring extension from Meter to site, Power point/MCB fitting and any other electrical work,Carpentry work. 6.Dismantling/Shifting of Old AC`s Masonry, Core Cutting Fabrication and Electrical |
| Installation Warranty | 1 year on comprehensive; 5 years on compressor |
Has Star Rating
2 Star
Consumes more power:
2160 Watts vs 1980 Watts
Common Features
Consumers less power:
1510 Watts vs 1980 Watts
Has Star Rating
3 Star
Lower Tonnage:
1.5 Tons vs 2 Tons
Common Features
Consumers less power:
1492 Watts vs 1980 Watts
Has Star Rating
3 Star
Lower Tonnage:
1.5 Tons vs 2 Tons
Common Features
Consumers less power:
1507 Watts vs 1980 Watts
Has Star Rating
2 Star
Lower Tonnage:
1.5 Tons vs 2 Tons
Common Features
Consumers less power:
1910 Watts vs 1980 Watts
Has Star Rating
3 Star
Common Features
Has Star Rating
3 Star
Consumes more power:
2350 Watts vs 1980 Watts
Common Features
