Join 91mobiles WhatsApp Channel
OnePlus Nord 3 launch might be inching close.
OnePlus Nord 3 is tipped to be powered by the MediaTek Dimensity 8200 processor and has 100W fast charging support. It appears the design of the phone will have a close resemblance to the Nord 2T, with two circular rings and a punch-hole cutout.
OnePlus Nord 3 !? 👀
— Shishir (@ShishirShelke1) January 29, 2023
- 6.74" 1.5K 120Hz Amoled
- Flat side frame | Alert slider
- Dimensity 8200
- Triple rear camera
- 4500/5000mAh + 100W
- OxygenOS 13.1 (Android 13) pic.twitter.com/5LZbxgkk4s
The OnePlus Nord 3 design schematics show the phone will have a centre-positioned punch-hole cutout for the selfie shooter on the front. The power button and what appear to be an alert slider are present on the right, while the volume rocker is on the left. Moving to the back, we see two circular rings, with the primary camera sensor placed on the right above and two other lenses in the below circular ring. We have LED flash as well. The phone colours are kept under wraps, for now.
The OnePlus Nord 3 is tipped to sport a 6.74-inch 1.5K AMOLED display with a 120Hz refresh rate and flat side frame. The phone could be powered by the MediaTek Dimensity 8200 SoC with Mali-G610 MC6 GPU, which means the performance should be superior. The SoC is fabricated on TSMC's 4nm manufacturing process. The handset could run on Android 13-based OxygenOS 13.1 custom skin.
Moving on, the OnePlus Nord 3 is said to feature triple camera sensors on the back but the optic details are currently under wraps. The tipster says the phone could either use a 64MP Omnivision sensor or a 50MP Sony IMX890 sensor. The main lens could be paired with an 8MP ultra-wide-angle lens and a 2MP namesake lens. The OnePlus Nord 3 could pack a 4,500/5,000mAh battery with 100W fast charging support.