Alleged OnePlus Ace 3V leaked schematic shows complete design

OnePlus Ace 3V design revealed via schematics

• Weibo user Tech Geek has shared the schematics of the alleged OnePlus Ace 3V phone.
• These reveal the complete design of the phone and the changes we might see over the predecessor.

• Instead of two large camera rings on the OnePlus Ace 2V, we see three vertical camera sensors on the Ace 3V, where two of them could be camera sensors and the third might be an LED flash cutout.
• We see an alert slider on the left, while the volume rocker and power button are on the right edge.
• Moving to the front, we see a centre-positioned punch-hole cutout for the selfie shooter and narrow bezels.
• The OnePlus Ace 3V schematics suggest there will be a boxy chassis.

The Weibo user has shared another render image, which only shows the back panel of a OnePlus phone. We can see three vertical camera cutouts and an LED flash. Interestingly, we see the mention of Hasselblad right below the second camera module, which could be the primary unit since there is a green-colour casing around it. There is the OnePlus logo in the middle. The power button and volume rocker are on the right edge.

There are speculations the OnePlus Ace 3V might be rebranded as the OnePlus Nord 4/5 for global markets. 

OnePlus Ace 3V specifications (expected)

• Chipset: The OnePlus Ace 3V is tipped to be powered by the Qualcomm Snapdragon 7 Plus Gen 3 chip. The SoC is yet to be announced.
• Memory: There could be up to 16GB RAM and up to 1TB of storage.
• Display: While the display size details are under wraps at the moment, we might get a 1.5K display panel with a 120Hz refresh rate.
• Battery: The phone could house a 5,500mAh battery with a 100W wired charging adapter.