The Redmi Note 13 series is officially confirmed
- The Redmi Note 13 Pro+ will be the first model in the numbered series to feature a curved display on the front.
- The teaser images show the volume rocker and power buttons are on the right edge.
- We can see a centre-positioned punch-hole cutout for the selfie shooter and very narrow bezels, including the chin.
- The Redmi Note 13, probably the Note 13 Pro+, will come with a leather finish on the back. While the other models will have a glass back panel.
- The back panel has two large camera cutouts and a tiny cutout to accommodate triple camera sensors.
- The USB Type-C port, speaker grill, and SIM tray section are at the bottom. While the top section has another speaker vent and an IR blaster.
The teaser images show the Redmi Note 13 Pro+ will have ultra-thin bezels on all four sides, with a 2.37mm small chin. The handset will feature Corning Gorilla Victus protection and a 200MP Samsung ISOCELL HP3 sensor with f/1.65 aperture and OIS.
Also Read
Redmi Note 13 series specifications (expected)
Here are the rumoured Redmi Note 13 series specifications.
- Display: 6.67-inch 1.5K AMOLED display with 120Hz refresh rate, punch-hole cutout and narrow bezels.
- Processor: MediaTek Dimensity 7200 Ultra SoC with Mali-G610 GPU. However, the vanilla Redmi Note 13/Note 13 Pro might come with a different chipset.
- RAM And Storage: 6GB/8GB/12GB and 128GB/256GB/512GB/1TB storage options.
- Software: Android 13-based MIUI 13 custom skin out of the box.
- Rear-facing camera: 200MP primary camera, 8MP ultra-wide lens, and a 2MP macro sensor.
- Front camera: The Redmi Note 13 series might have a 16MP front camera for selfies and video chats.
- Battery: The Redmi Note 13 and Note 13 Pro are tipped to pack a 5,120mAh battery with 67W fast charging, while the Note 13 Pro+ could have a 5,000mAh with 120W fast charging.