OPPO Reno 7, Reno 7 Pro, Reno 7 SE renders and specifications have been revealed through JD.com ahead of the launch later this week.
The OPPO Reno 7 is the vanilla version and will serve as an entry point into the OPPO Reno 7 lineup. It will be available in - Star Rain Wish, Dawn Gold, and Starry Night Black. It gets a 64MP triple camera unit on the back and a punch-hole camera on the top left-hand corner of the screen. The device has been measured to be 7.59mm thick. Inside, the OPPO Reno 7 gets the Qualcomm Snapdragon 778G chipset. The variants for the device are listed as - 8 GB RAM + 128 GB storage, 8 GB RAM + 256 GB storage and 12 GB RAM + 256 GB storage. The Reno 7 packs in a 4,500mAh battery with support for 65W fast charging.
The OPPO Reno 7 Pro takes things up a notch but comes in the same three colour options as the Reno 7 - Star Rain Wish, Dawn Gold, and Starry Night Black. At the back, there is an upgrade in the form of a quad-camera setup while the hole punch cutout housing the selfie camera is similarly located on the top left-hand corner. On the inside, the OPPO Reno 7 Pro gets the Dimensity 1200 Max chip from MediaTek and pairs it up with 8GB or 12GB of RAM and 128GB or 256GB of internal storage respectively. Powering the device is a 4,500mAh battery with 65W fast charging support. The OPPO Reno 7 Pro posts a slimmer profile at 7.45mm of thickness.
The OPPO Reno 7 SE comes in the same three shades as the other two models listed. The device differs in the form of a thicker chin which can imply that it is using a different display technology than the OPPO Reno 7 and OPPO Reno 7 Pro. There is a triple camera arrangement at the back however the design looks slightly different. It will still play host to the front camera via a hole punch cut out on the top left-hand corner. The device will come in 8 GB RAM + 128 GB storage and 8 GB RAM + 256 GB storage variants.